Top Eight Best Drill Presses on The Market Today

    RankProductReview Score
    1Shop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press/Spindle SanderBy Shopfox9.9Buy on Amazon
    2WEN 4208 8-Inch 5 Speed Drill PressBy Wen9.6Buy on Amazon
    3SKIL 3320-01 120-Volt 10-Inch Drill PressBy SKIL9.3Buy on Amazon
    4Jet JDP-12 12-Inch Drill Press with Digital ReadoutBy Jet9.7Buy on Amazon
    5WEN 4210 Drill Press with Laser, 10-InchBy Wen9.9Buy on Amazon
    6Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch Floor Model Drill PressBy Jet9.7Buy on Amazon
    7Delta 18-900L 18-Inch Laser Drill PressBy Delta9.2Buy on Amazon
    8Powermatic PM2800B 1792800B Drill PressBy Powermatic9.1Buy on Amazon

    If you plan on buying a drill press, then you should know that certain features are going to be a lot more desirable for specific projects. If this is the first time you plan on getting one, then it’s good to know that a drill press is basically a stationary form of a hand held drill. Compared to the hand-held model, the stationary type is a lot more powerful and definitely more accurate as well.

    As expected, there are many drill press models out there that you can choose from and that is why below we’re going to give you a rundown of the best models in each of the two main categories they’re classified in. But first, let’s see what you have to keep in mind when choosing one.

    How to choose the Best Drill Press

    Floor versus Bench-Top Model:

    As the name entails, the bench top model is going to sit on a table top, while the floor model is going to sit on the floor. Most of the times, it’s recommended that you consider getting a floor model since not only is it able to handle a wider range of projects, but it also comes with more attachments and accessories. Unless you’re looking to save space or want a more compact tool, then the floor model is definitely a great pick.

    Multiple Spindle Speeds:

    The drill definitely needs to have several speeds if you want to use it for metalwork and woodwork. However, if you do decide to work with wood, you’ll need to use medium to higher speeds, while metal requires lower speeds. If versatility is your thing, then it’s recommended to go for a drill press that can operate between five hundred and four thousand RPMs. But if you only plan on drilling, 2000 RPMs are enough.


    With more power, you’ll be able to drill through tougher materials, so make sure your drill press has a power of minimum 3/4 HP.

    Drill Press Table:

    For increased flexibility, make sure you go for a drill pres model that has a table which can swivel 360 degrees, can be lowered and also raised.


    If your projects will require repetitive boring to keep consistency, then a depth stop is mandatory. Make sure your model has an easy-to-stop drill feature.


    The heavier the tool, the better it’s going to be at absorbing vibration and running more smoothly.

    Useful Accessories:

    To keep your material firmly in place, your tool needs to have a drill press clamp. Fences should also be used for keeping the project in position during drilling. Depending on the accessories you choose to use, drill presses can be used for more than drilling, including mortising, grooving and sanding.

    Ability to Be Serviced:

    Last but not least, make sure the drill press you get can be easily serviced and upgraded.

    Benchtop Drill Presses:

    WEN 4208 8-Inch 5 Speed Drill Press (View on

    Affordable, powerful and an overall excellent all-purpose drill press.

    By far the WEN 4208 is one of the best all purpose drill presses out there that comes with a host of features for an amazing price. If you require reliability, precision and extreme power, then this is certainly the best choice you can consider.

    In general, the WEN 4208 is recommended for people who are involved in various crafty takes and want to finish their projects fast and with great results. The motor on this model is a 1/3 HP motor that’s been developed with ample torque and power and gives you all the power you require to handle even the toughest piece of material. Accommodating 5 speeds and ranging in RPMs from 620 to 3100, the motor on the WEN 4208 is definitely a winner.

    The two inch spindle travel coupled with the easy to read linear depth are a godsend for those who need to drill consistently for long periods of time. Therefore, whenever you’ll use the WEN 4208 for any drilling project, you can have the peace of mind results are going to be amazing.


    1. Excellent accuracy even for repetitive drill operations.
    2. Great price.
    3. Drill fast thanks to the five speed change option.
    4. The WEN 4208 is a very durable and strong drill press that’ll last for many years to come.

    SKIL 3320-01 120-Volt 10-Inch Drill Press (View on

    Precise, powerful and highly adjustable drill press with a laser precision system.

    Skil 3320-01 is a small benchtop drill press with capabilities of handling a wide range of drilling tasks. Designed by SKIL, this model is 120 volts compatible and most importantly, it is easy to fix and use. It’s incorporated laser system is quite beneficial when it comes to drilling small holes.

    Who is Skil 3320-01 designed for?


    Anyone who has a small garage or a shop with limited space needs to definitely get their hands on the Skil 3320-01. No matter what type of wood you may want to drill holes into, the Skil 3320-01 is going to help you achieve that in just a few seconds. Plumbers, masons and carpenters find this drill press to be very resourceful and reliable since it’s not only simple to use, but also easy to fix if need be. On top of that, it’s designed with safety in mind to protect you while using it.

    Power and variable speed


    The Skil 3320-01 features a powerful 3.2 amp motor which offers you plenty of power to drill holes in just about any type of material. The power system also features an adjustable speed pulley and the drill press features 5 different speeds as well. To include them, they are 570 RPMs, 900 RPMs, 1390 RPMs, 2050 RPMs and 3050 RPMs. Keep in mind that compared to other drill presses out there, the belts on this model are operated manually.

    Adjustable work surface

    You can easily adjust the cast iron plate work table of the Skil 3320-01 by just moving the rank handle up and down. On top of that, the work table can also be tilted left or right up to forty five degrees when you want to drill angled holes. Moving on, the worktable is specially designed so that allows you to use a wide range of fences and clamps that make use of slots. Lastly, the LaserX2 laser system on the Skil 3320-01 makes it possible to perform precise hole alignments regardless of the project you’re working on.

    Jet JDP-12 12-Inch Drill Press with Digital Readout (View on

    Industrial grade drill press recommended for tackling larger drills.

    The Jet JDP-12 is by far one of the most popular drill presses on the market today and that’s because it comes with an industrial quality 5/8” chuck that’s perfect for tackling larger drills. On top of that, this is also a very compact machine that’s currently in very high demand. The Jet JDP-12 can be successfully used for completing a large range of projects and given its outstanding build quality, it’s by far one of the most durable drill presses you can currently buy. In terms of warranty, this model comes with a 3-year manufacturer warranty.

    Who Is It For?


    If you need to make specific and high quality drill holes, then the Jet JDP-12 is definitely the best choice for your needs. No matter if you work in a craftsman shop or you’re a woodworker, this bad boy is going to make it easy for you to complete your project on time and with excellent results.

    Top class compact design


    The Jet JDP-12 complies with the latest industry standards when it comes to portability and since it measures twenty by eleven by twenty eight inches and weighs only eighty eight pounds, it’s easily transportable from one work site to another if need be. On top of that, it also comes with an electric cable that’s between 3 to 4 meters long.

    Main Specs and Features


    1. LED work light for improved visibility.
    2. More accurate drilling thanks to the digital readout that features spindle speed.
    3. 5/8” industrial duty chuck.
    4. Compact design for hassle free transportation.

    Shop Fox W1668 3/4-HP 13-Inch Bench-Top (View on

    A great choice for difficult projects that require great power and precision.

    What you’ll definitely love about the Shop Fox W1668 drill press is the fact that this is a thirteen inch 3/4 Horse Power drill press that’s also a twelve speed oscillating sander. Because it has greater speeds, power and capacity, the W1668 is very much recommended for those who need to tackle difficult projects. The Shop Fox W1668 also includes a port for dust collection and there’s also a clearance hole on the table which can be easily used when sanding. Given the fact it has a drilling capacity of three quarters of an inch, you can use this drill press to perform almost any type of drilling job.

    Who Is It For?


    From small hobby shops to professional machine shops, the Shop Fox W1668 is certainly going to be a tool you’ll grow fond of fast. This model offers incredible versatility and if you’re looking for the best value and array of features in a drill press, then this is definitely the one you should get.

    Tilting Table


    The tilting table of the W1608 can be tilted at ninety degrees to either right or left. On top of that, the tilt and height can also be adjusted so that the work piece height can be accommodated or so that special sanding or drilling angles can be achieved.

    Oscillating Feature

    You can easily convert the Shop Fox W1668 into a sander in just a few seconds. Given its oscillation feature, you can rest assured that the heat produced during operation is going to be dramatically reduced. The drill press features 16 different speeds which are enough to complete any type of project. Included with the Shop Fox W1668 are also a mandrel, an eighty grit sanding paper, but also a 3-piece spindle drum kit. Lastly, for maximum visibility, the W1608 features a work light.

    The Best Benchtop Drill Press

    The Shopfox W1668 is definitely the best benchtop drill press on this top 4 list. Not only can it be used as a drill press, but also as a sander, giving you a lot more flexibility and power that can help you tackle a wider range of projects. Given its compact size, this is the right choice for both hobbyists and people who have small personal shops to complete their various drilling projects.

    Buy The Shop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press on

    Unlike other models, the tilting table on the W1608 can be tilted at ninety degrees to either right or right and you can also adjust the height and tilt in order to make sure that the height of your work piece is exactly the one you need.

    Last but not least, this is one of the few benchtop drill presses out there that features sixteen speeds which, if you’re in the know, are enough to help you tackle literally any kind of project. For even more versatility, the Shop Fox W1608 features an eighty grit sanding paper, a mandrel, a 3 piece spindle drum kit and of course, a work light to improve visibility when working in poor lighting conditions.

    Floor Drill Press:

    Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch (View on

    Powerful 3/4 HP motor and 16 different spindle speeds for powerful and fast drilling.

    The Jet 354166 is a 3/4 HP drill press that’s designed for a wide range of jobs. With features such as the possibility to swivel at 360 degrees, 45 degree tilting angle, but also its strong cast iron table and sixteen different motor speeds, it’s certainly a drill press that’s built for the long haul. Most people go with this model not only because it’s affordable, but at the same time it’s extremely convenient and accurate, ensuring you finish your drilling projects on time and with excellent results.

    Best Application

    Thanks to features such as the revolving table, height adjustment and high power motor, the Jet 354166 can be used for a wide range of applications, including metal fabrication workshops and carpentry.

    The Jet 354166 has a variety of applications thanks to its high power motor and impressive features such as the height adjustment, the tilting and revolving table. The voltage ranges between 115 to 230V and it draws current between 4.5 A and up to 9.0 A. in terms of speed selection, you can choose any speed from as low as 200 RPMs to as high as 3630 RPMs.

    Main Specs and Features


    1. Features a built-in work lamp.
    2. Sixteen different spindle speeds help you tackle a wide range of projects.
    3. Powerful 3/4 HP motor.
    4. Fifteen inch floor drill press that’s perfect for both professional and home use.

    Delta 18-900L 18-Inch Laser Drill Press (View on

    Professional and industrial grade belt driven drill press capable of 3000 RPMs.

    From the housing to the handles, the Delta 18-900L is what you can really call a high quality industrial grade and professional belt driven drill press. Given the fact it features 16 speeds, it can be used for drilling a wide range of metals, plastics and woods and it’s also able to run off 12V. the Motor is a 0.75 HP induction motor that’s perfect for all kinds of woodworking projects.

    Speaking of speeds, you can easily change them thanks to the tensioning belt drive system that’s very simple to operate through all 16 speed choices. As for the RPMs, they range between 170 RPMs and all the way to 3000 RPMs.

    Main Specs and Features:


    1. Improved visibility thanks to the flexible LED light.
    2. Completely adjustable TwinLaser helps project a bright red crosshair on the material you’re working with for better drilling accuracy.
    3. Independent Depth Scale and Micro Adjustable Depth Stops allows for easy, quick and accurate repetitive drilling.

    WEN 4210 Drill Press with Laser (View on

    Perfect for drilling holes in materials of up to 4” thick.

    Thanks to its 2/3 HP motor, the WEN 4210 meets the needs of both professional and home users, but also includes a complete 4” of stroke capacity. This allows you to drill holes in materials of up to 4” thick. Because you have such an amazingly large spindle travel, if you’re someone who loves drilling holes through four by four boards, you’ll find that doing so is going to be easier than ever.

    The variable speed of the WEN 4210 can be easily adjusted from a low 280 RPMs to a maximum of 1000 RPMs by just turning a lever. However, if you want, you can also make a fast belt adjustment to increase variable speed from 1000 RPMs and up to 3300 RPMs.

    The cast iron table on the WEN 4225 measures twelve by twelve inches and it’s able to pivot up to forty five degrees in both right and left directions. Thanks to the embedded laser point, you can have the peace of mind you can easily drill very precise holes. The chuck on the other hand is able to accept bits that range from 1/12” to 5/8”. In order to prevent vibration and the drill from walking, the cast iron base and frame are built exactly for this purpose. Lastly, the WEN 4225 also features a lamp which helps illuminate the work table for improved visibility in poorly lit workshops.

    Powermatic PM2800B 1792800B Drill Press (View on

    One of the most flexible drill presses on the market today.

    If you’re working in the wood industry, then you probably know how important having a simple machine that offers excellent workmanship can be. In this regard, you’ll certainly be very happy with the Powermatic PM2800B’s performance because not only can it hold your pieces of timber firmly in place when drilling holes in them, but you can also adjust the spindle’s speed to suit your project’s needs.

    Who Is It For?


    If you’re in the woodworking industry and are working as maker of household furniture, office furniture or as a workshop technician, then this is certainly the tool for you. On top of that, the Powermatic PM2800B can also be used for commercial constructors of infrastructural timber designs.

    Variable speed


    One of the traits that stands out about the Powermatic PM2800B is the fact that you can easily change the speed without having to change the belts. What this means for you is that you can easily choose the exact flexibility of work you need to complete your project. For instance, if the job requires slow movement, you can easily adjust that using LED control. On the other hand, if you’re a fast user, then the Powermatic PM2800B will definitely allow you to work fast. Better yet, thanks to the LED lights featured on the drill, you’re going to benefit from excellent lighting while working on your project.

    Repetitive actions


    The Powermatic PM2800B allows you to set different actions for different pieces of wood and the good news is that these actions will save you a lot of energy and time.

    Main Specs and Features:


    1. The Powermatic PM2800B measures 58x26X15 inches.
    2. Weighs approximately 265 lbs.
    3. Easily change speeds based on the project you’re tackling thanks to the digital readout.
    4. A single rotation of the handle makes the quill travel about six inches.

    The Best Floor Drill Press

    If you’re currently looking for the best floor drill press, then there’s no doubt you need to take a closer look at the WEN 4210. This amazing drill press is intended for use by both professional and home users and what makes it stand apart from all other models on the market is the fact that it comes with a full 4” stroke capacity. Given that, it basically allows you to drill holes in materials that are as thick as four inches. Better yet, if you’re the kind who has to drill holes through 4×4 boards on a regular basis, then this is by far one of the best drill presses you can consider using.

    WEN 4225

    Buy The WEN 4210 Drill Press with Laser on

    In terms of speed, the WEN 4210 has an adjustable variable speed that can go as low as 280 RPMs and up to 1000 RPMs with a simple turn of a lever. On the other hand, there’s also the possibility of changing the speed by using the belt adjustment system. In this case, the speed will range from 1000 RPMs and up to 3300 RPMs.

    Lastly, you’ll love the fact that the cast iron table on the WEN 4225 is about twelve by twelve inches and can easily pivot up to 45 degrees left and right. But probably what most drill press users will have a problem with when working on their various projects is drill walking and vibration.

    Luckily, the WEN 4210 doesn’t have these issues thanks to the fact that it comes with a well built cast iron base and frame that prevent this from happening. One last addition to the WEN 4225 is the work light which basically helps you work in any lighting conditions and have the peace of mind you won’t make mistakes due to poor visibility. As you can see, if you’re looking for a reliable, sturdy and overall versatile drill press, then the WEN 4225 is by far one of the most feature rich, reliable and excellent drill presses available today.